1/3 www.rohm.com c 2011 rohm co., ltd. all rights reserved. 2011.10 - rev.d power transistor (60v, 3a) 2sc5825 ? features ? dimensions (unit : mm) 1) high speed switching. (tf : typ. : 30ns at i c = 3a) 2) low saturation voltage, typically (typ. : 200mv at i c = 2a, i b = 0.2ma) 3) strong discharge power for inductive load and capacitance load. 4) complements the 2sa2072. ? applications low frequency amplifier high speed switching ? structure npn silicon epitaxial planar transistor ? packaging specifications taping 2sc5825 type tl 2500 package basic ordering unit (pieces) code ? absolute maximum ratings (ta=25 ? c) parameter v v v a a w w c c symbol v cbo v ceo v ebo i c i cp p c tj tstg limits unit collector-base voltage collector-emitter voltage emitter-base voltage collector current power dissipation junction temperature range of storage temperature continuous pulsed 60 60 6 3 6 1.0 10.0 150 ? 55 to 150 ? 1 ? 2 ? 3 ? 1 pw = 100ms ? 2 each terminal mounted on a recommended land ? 3 tc = 25 c each lead has same dimensions abbreviated symbol : c5825 (1) base (2) collector (3) emitter cpt3 (sc-63)
2/3 www.rohm.com c 2011 rohm co., ltd. all rights reserved. 2011.10 - rev.d data sheet 2sc5825 ? electrical characteristics (ta=25 ? c) collector-emitter breakdown voltage collector-base breakdown voltage emitter-base breakdown voltage collector cut-off current emitter cut-off current collector-emitter saturation voltage dc current gain transition frequency corrector output capacitance turn-on time storage time fall time parameter symbol min. typ. max. unit condition bv ceo bv cbo bv ebo i cbo i ebo v ce (sat) h fe f t c ob t on t stg t f ? 1 non repetitive pulse ? 2 see switching charactaristics measurement cicuits i c = 1ma i c = 100 a i e = 100 a v cb = 40v v eb = 4v i c = 2a i b = 200ma v ce = 2v i c = 100ma v ce = 10v i e = ? 100ma f = 10mhz v cb = 10v i e = 0ma f = 1mhz ? 1 ? 1 ? 2 60 60 6 ? ? ? 120 ? ? ? ? ? ? ? ? ? ? 200 ? 200 20 50 150 30 ? ? ? 1.0 1.0 500 390 ? ? ? ? ? v v v a a mv ? mhz pf ns ns ns i c = 3a i b1 = 300ma i b2 = ? 300ma v cc 25v ? h fe rank q 120 ? 270 r 180 ? 390 ? electrical characteristic curves 0.01 10 1 0.1 10 100 1000 collector current : i c (a) switching time : (ns) fig.1 switching time ta = 25 c v cc = 25v i c / i b = 10 / 1 tstg tf ton 0.001 0.01 0.1 1 10 1 10 100 1000 collector current : i c (a) dc current gain : h fe fig.2 dc current gain vs. collector current ( ) ta = 125 c ta = 25 c ta = ? 40 c v ce = 2v 0.001 100 10 1 0.1 0.01 1 10 100 1000 collector current : i c (a) dc current gain : h fe fig.3 dc current gain vs. collector current ( ? ) ta = 25 c v ce = 5v v ce = 3v v ce = 2v 0.001 100 10 1 0.1 0.01 0.01 0.1 1 10 collector current : i c (a) fig.4 collector-emitter saturation voltage vs. collector current ( ) collector saturation voltage : v ce (sat) (v) i c / i b = 10 / 1 ta = 125 c ta = 25 c ta = ? 40 c 0.001 10 1 0.1 0.01 0.01 0.1 1 10 collector current : i c (a) fig.5 collector-emitter saturation voltage vs. collector current ( ? ) collector saturation voltage : v ce (sat) (v) ta = 25 c i c / i b = 20 / 1 i c / i b = 10 / 1 collector current : i c (a) fig.6 base-emitter saturation voltage vs.collecter current base emitter saturation voltage : v be (sat) (v) 0.001 10 1 0.1 0.01 0.1 1 10 i c / i b = 10 / 1 ta = 125 c ta = 25 c ta = ? 40 c
3/3 www.rohm.com c 2011 rohm co., ltd. all rights reserved. 2011.10 - rev.d data sheet 2sc5825 0.1 10 1 0.01 0.1 1 10 v ce = 2v base to emitter voltage : v be (v) fig.7 grounded emitter propagation characteristics collector current : i c (a) ta = 125 c ta = 25 c ta = ? 40 c emitter current : i e (a) fig.8 transition frequency transition frequency : ft (mhz) 0.001 10 1 0.1 0.01 1 10 100 1000 ta = 25 c v ce = 10v 0.1 1 10 100 1 10 100 base to collector voltage : v cb (v) fig.9 collector output capacitance ta = 25 c f = 1mhz collector output capacitance : cob (pf) ? switching characteristics measurement circuits collector current waveform base current waveform i b1 i b1 90% 10% i b2 i b2 i c v in p w i c r l = 8.3 v cc 25v p w 50 s duty cycle 1% ton tstg tf
r1120 a www.rohm.com ? 2011 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specified herein is subject to change for improvement without notice. the content specified herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specifications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specified in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the produc ts. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specified in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any product, such as derating, redundancy, fire control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specified herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.
|
